链条式网带

支撑方式Type of stay

圆钢棒是一般用的型式，在两侧的链要的销部分，装进经裁剪的圆钢棒，而网带要调整其厚度，使圆钢棒可以通过的型式。

Step-cut round rod(stay pin)is fitted to chain at both sides,and thickness of spiral is adjusted so that round rod passes inside spiral.

● 平板形式
使用装有附件的链条，在两侧的附件上面装上平板。平板可以跟圆条式
一样，穿进去螺旋内，或在平板上面摆放着网带的型式。为了使网带能
位于链条中心，必须在附件和平板之间插入垫片。
Flat bar type
Chain with atachment is used.Flat bar is fitted to attachment at both sides.Flat bar
Is passed inside spiral(as with stay pin type)or belt is put on flat bar.Spacer must
Be provided between attachment base and flat bar so that belt is positioned at same                        
Level as chain center.
● 角铁型式
链条中心宽度较宽的情况或因载荷太重，无法装上支撑轨道的情况等时，
为了预防发生挠曲，才使用这种型式。用跟平板一样的装设方式来组立。
Angle channel type
This type is used to prevent deflection in case chain c/cis wide and suppor rail can
Not be installed.
The same installation procedure as that applied to flat bar is applied.
● 圆管型式
跟角铁型式相同，但因要装设在附件，须把圆管压扁。如链条采用EP
型式，可以跟圆钢棒一样的方式组装，且因量轻而宽度方向的挠曲较
难发生。
Pipe type
Similar to angle type. With pipe type ,however,it is necessary to crush pipe engs so                       
As to fit to attachment.If EP type chain is used,the same assembling procedure as
Stay pin type can be applied. In this case, weight is reduced and deflection in
Direction lr width is suppressed.
 

是在通常网带的两边加装链条的型式，网带和链条通过加装圆棒所达到同步运转

These belts are made by fiting chains to both sides of ordinary Wire conveyor belt.Belt and chain are synchronized through Stays(cross supports).

Advantages
1． 因为用链轮来转动链条，所以网带不易蛇行。
Because chain is driven by sprocket,meandering does not
Occur。
2． 用调整网带的节距的方法，就可把各种型式的链条装上去。
Various types of chain can be applied by adjusting belt pitch.
3. 因为有链条和圆棒，所以可以折边或装档板。
It is easy to attach side guard and product stopper in Combination with chain and stay.

圆钢棒  Stay pin type

扩展阅读：网带 长城网带